Hikvision Digital Technology DS-7608HI-ST Uživatelský manuál stáhnout pdf (Strana 43)

User Manual of Digital Video Recorder

4.1 Configuring PTZ Settings

Purpose:

Follow the procedure to set the parameters for PTZ. The configuring of the PTZ parameters should be done

before you control the PTZ camera.

Before you start:

Check that the analog PTZ camera and the device are connected properly through RS-485 interface.

Steps:

1. Enter the PTZ Settings interface.

Menu >Camera> PTZ

Figure 4. 1 PTZ- General

2. Choose the camera for PTZ setting in the Camera dropdown list.

3. Enter the parameters of the PTZ camera.

Note: All the parameters should be exactly the same as the PTZ camera parameters. Only PTZ Protocol and

address can be configured for network cameras.

Example: If the PTZ camera has a Baud rate as 115200, you should input 115200 in the Baud Rate field.

4. Click if you want to configure same settings to other analog PTZ cameras.

5. Click to save the settings.

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 194 195

Žádné komentáře

Hikvision Digital Technology DS-7608HI-ST Uživatelský manuál Strana 43